PT9: Multi-standard video encoder IP core

PT13: Very compact microprocessor IP core

PT3 is a high quality, adaptive 3-line comb, NTSC video decoder

Despite the small area the decoder occupies it offers a near broadcast quality and is free from the artifacts shown by some other off the shelf decoders.

The decoder accepts 10-bit composite line locked video sampled at 27MHz together with synchronising signals and clock, (for example from the Analog Devices AD9981 ADC). The decoder is a complementary design. The colour burst from the input video is used to phase lock the subcarrier oscillator which then addresses a sine and cosine LUT. These waveforms are used to demodulate the colour component of the composite waveform. The resulting U and V colour components are then low pass filtered and applied to a 3-line adaptive comb filter. The chrominance comb adapts between a notch filter and the line comb based on the chrominance and luminance amplitude differences across the comb aperture. The resulting combed U and V components provide the colour component outputs where they are amplified and scaled before being formatted to a 10-bit BT656 output. The combed U and V are also remodulated onto the colour subcarrier and subtracted from the composite to produced a combed luminance output which is also scaled and formatted into the BT656 stream.

Control and status registers are written to and read from using a conventional 8 bit wide microprocessor interface.

PT3 is supplied either as an encrypted 'black-box' file with a fixed 3 year renewable unlimited use license, (Altera only, lower cost), or as an unlimited time, unlimited use license, (all vendors and ASIC/IC). Source code files are supplied as RTL compliant Verilog. PT3 is supplied with 6 months telephone/e-mail support and a 3 year update and bug fix guarantee.

Please contact SingMai if you wish to arrange a demonstration of the core or for pricing: sales@singmai.com.

Full information can be found in the user manual.

Download the PT3 leaflet

Download the PT3 user manual

AD9981 datasheet

DP2: Altera FPGA development platform

DP4: Xilinx FPGA development platform